+
  • 07.jpg

CLT/A series cyclone dust collector (single cylinder, double cylinder, three cylinder, four cylinder, six cylinder)

Classification:

The cyclone dust collector produced by the company, according to the number of cylinders, there are five combinations of single cylinder, double cylinder, three cylinder, six cylinder, etc


Details Introduction


Overview

The cyclone dust collectors produced by our company are classified according to the number of cylinders, with five combinations including single cylinder, double cylinder, triple cylinder, and six cylinder. Each combination has two types of air outlet: Type I horizontal air outlet and Type II (upper air outlet). For Type I twin tube combination, there are two types of combinations: center inlet & outlet air and side inlet & outlet air. Type I single tube and triple tube only have side outlet air, while four tube and six tube combination only have center inlet & outlet air. For various combinations of Type II, any of the above Type I inlet positions can be used. This dust removal equipment has the characteristics of low resistance, high dust removal efficiency, large air processing volume, stable performance, small footprint, simple structure, practicality and low cost. Suitable for coarse and intermediate dust purification in various mechanical processing, metallurgical building materials, and mining operations.

 

Working mechanism

The difference in the magnitude of the inertial centrifugal force generated by the cyclone airflow on dust particles and air separates them. The dusty airflow enters the cylindrical body from the intake pipe at a speed of 12-25m/s along the tangential direction, and spirals downwards between the outer cylinder and the central exhaust pipe. Inertial centrifugal force is generated during the rotation process. Dust particles are affected by airflow movement in one direction and rotate downward within it; On the other hand, under the action of centrifugal force, it gradually spreads outward and approaches the cylinder wall. Finally, it collides with the inner wall of the outer cylinder, rotates and slides down along the inner wall, and is collected at the bottom ash outlet in the middle and discharged from there. The gas, due to its small mass and minimal centrifugal force, moves towards the center of the dust collector with the contraction of the cone shape, and is subjected to bottom resistance to rise, forming an upward vortex that is discharged from the upper end of the exhaust pipe to achieve dust removal.

 

Main component

The air inlet, volute, cylinder and  hopper 

 

Model  description

 

 

Range of Gas flow processing 

1000~500000m3/h, the outlet emission concentration is less than 50mg/Nm3.


Applicable industry
Cleaning and recycling of dusty gas in building materials, metallurgy, electric power, non-ferrous and chemical industries


Technical innovation points:

● Low resistance, high dust removal efficiency
● Large air volume and high inlet concentration
● Small footprint
● Simple structure, easy maintenance
● Low operating costs.


Technical performance

 

Type number

Gas flow (m3/h)

Equipment Resistance (Pa) efficiency (%)

CLT/A-3.0

670-1000

86-800 85-90

CLT/A-3.5

910-1360

CLT/A-4.0

1180-1780

CLT/A-4.5

1500-2250

CLT/A-5.0

1860-2780

CLT/A-5.5

2240-3360

CLT/A-6.0

2670-4000

CLT/A-6.5

3130-4700

CLT/A-7.0

3630-5440

CLT/A-7.5

4170-6250

CLT/A-8.0

4750-7130

CLT/A-2×3.0

1340-2000

CLT/A-2×3.5

1820-2720

CLT/A-2×4.0

2360-3560

CLT/A-2×4.5

3000-4500

CLT/A-2×5.0

3720-5560

CLT/A-2×5.5

4480-6720

CLT/A-2×6.0

5340-800

CLT/A-2×6.5

6260-9400

CLT/A-2×7.0

7260-10880

CLT/A-2×7.5

8340-12500

CLT/A-2×8.0

9500-14260

CLT/A-3×3.5

2730-4080

CLT/A-3×4.0

3540-5340

CLT/A-3×4.5

4500-6750

CLT/A-3×5.0

5580-8340

CLT/A-3×5.5

6720-10080

CLT/A-3×6.0

8010-12000

CLT/A-3×6.5

9390-14100

CLT/A-3×7.0

10890-16320

CLT/A-3×7.5

12510-18750

CLT/A-3×8.0

14250-21290

CLT/A-4×3.5

2640-5440

CLT/A-4×4.0

4720-7120

CLT/A-4×4.5

6000-9000

CLT/A-4×5.0

7440-11120

CLT/A-4×5.5

8960-13440

CLT/A-4×6.0

10680-16000

CLT/A-4×6.5

12520-18800

CLT/A-4×7.0

14520-21760

CLT/A-4×7.5

16680-25000

CLT/A-4×8.0

19000-28500

CLT/A-6×4.0

7080-10680

CLT/A-6×4.5

9000-13500

CLT/A-6×5.0

11160-16680

CLT/A-6×5.5

13440-20160

CLT/A-6×6.0

16020-24000

CLT/A-6×6.5

18780-28200

CLT/A-6×7.0

21780-32640

CLT/A-6×7.5

25020-37500

CLT/A-6×8.0

2850-42780


Keyword:

CLT/A series cyclone dust collector (single cylinder, double cylinder, three cylinder, four cylinder, six cylinder)

RELATED PRODUCTS

Qualifications

Business license

Business license

Safety Production License

Safety Production License

Construction Enterprise Qualification Certificate

Construction Enterprise Qualification Certificate

Engineering Design Qualification Certificate

Engineering Design Qualification Certificate

ISO 14001:2015

ISO 14001:2015

ISO 9001:2015

ISO 9001:2015

Leave a message and you will receive a surprise gift!

Head Office Address: No. 1178, Gaoke Building, Jiayuan Road, Hongshan District, Wuhan, Hubei, China

WhatsApp/Mobile: +86-13801339781

Email: fengsongtao@whsylt.com

Factory Address: No. 283 Zhongshan Avenue, Jinshan Street Office, Huangshi Economic Development Zone, Hubei, China