Wuhan SY Blue Sky Environmental Technology Engineering Co., Ltd.
CLT/A series cyclone dust collector (single cylinder, double cylinder, three cylinder, four cylinder, six cylinder)
Classification:
The cyclone dust collector produced by the company, according to the number of cylinders, there are five combinations of single cylinder, double cylinder, three cylinder, six cylinder, etc
Contact:
PRODUCTS
SOLUTION
Details Introduction
Overview
The cyclone dust collectors produced by our company are classified according to the number of cylinders, with five combinations including single cylinder, double cylinder, triple cylinder, and six cylinder. Each combination has two types of air outlet: Type I horizontal air outlet and Type II (upper air outlet). For Type I twin tube combination, there are two types of combinations: center inlet & outlet air and side inlet & outlet air. Type I single tube and triple tube only have side outlet air, while four tube and six tube combination only have center inlet & outlet air. For various combinations of Type II, any of the above Type I inlet positions can be used. This dust removal equipment has the characteristics of low resistance, high dust removal efficiency, large air processing volume, stable performance, small footprint, simple structure, practicality and low cost. Suitable for coarse and intermediate dust purification in various mechanical processing, metallurgical building materials, and mining operations.
Working mechanism
The difference in the magnitude of the inertial centrifugal force generated by the cyclone airflow on dust particles and air separates them. The dusty airflow enters the cylindrical body from the intake pipe at a speed of 12-25m/s along the tangential direction, and spirals downwards between the outer cylinder and the central exhaust pipe. Inertial centrifugal force is generated during the rotation process. Dust particles are affected by airflow movement in one direction and rotate downward within it; On the other hand, under the action of centrifugal force, it gradually spreads outward and approaches the cylinder wall. Finally, it collides with the inner wall of the outer cylinder, rotates and slides down along the inner wall, and is collected at the bottom ash outlet in the middle and discharged from there. The gas, due to its small mass and minimal centrifugal force, moves towards the center of the dust collector with the contraction of the cone shape, and is subjected to bottom resistance to rise, forming an upward vortex that is discharged from the upper end of the exhaust pipe to achieve dust removal.
Main component
The air inlet, volute, cylinder and hopper
Model description
Range of Gas flow processing
1000~500000m3/h, the outlet emission concentration is less than 50mg/Nm3.
Applicable industry
Cleaning and recycling of dusty gas in building materials, metallurgy, electric power, non-ferrous and chemical industries
Technical innovation points:
● Low resistance, high dust removal efficiency
● Large air volume and high inlet concentration
● Small footprint
● Simple structure, easy maintenance
● Low operating costs.
Technical performance
|
Type number |
Gas flow (m3/h) |
Equipment Resistance (Pa) | efficiency (%) |
|
CLT/A-3.0 |
670-1000 |
86-800 | 85-90 |
|
CLT/A-3.5 |
910-1360 |
||
|
CLT/A-4.0 |
1180-1780 |
||
|
CLT/A-4.5 |
1500-2250 |
||
|
CLT/A-5.0 |
1860-2780 |
||
|
CLT/A-5.5 |
2240-3360 |
||
|
CLT/A-6.0 |
2670-4000 |
||
|
CLT/A-6.5 |
3130-4700 |
||
|
CLT/A-7.0 |
3630-5440 |
||
|
CLT/A-7.5 |
4170-6250 |
||
|
CLT/A-8.0 |
4750-7130 |
||
|
CLT/A-2×3.0 |
1340-2000 |
||
|
CLT/A-2×3.5 |
1820-2720 |
||
|
CLT/A-2×4.0 |
2360-3560 |
||
|
CLT/A-2×4.5 |
3000-4500 |
||
|
CLT/A-2×5.0 |
3720-5560 |
||
|
CLT/A-2×5.5 |
4480-6720 |
||
|
CLT/A-2×6.0 |
5340-800 |
||
|
CLT/A-2×6.5 |
6260-9400 |
||
|
CLT/A-2×7.0 |
7260-10880 |
||
|
CLT/A-2×7.5 |
8340-12500 |
||
|
CLT/A-2×8.0 |
9500-14260 |
||
|
CLT/A-3×3.5 |
2730-4080 |
||
|
CLT/A-3×4.0 |
3540-5340 |
||
|
CLT/A-3×4.5 |
4500-6750 |
||
|
CLT/A-3×5.0 |
5580-8340 |
||
|
CLT/A-3×5.5 |
6720-10080 |
||
|
CLT/A-3×6.0 |
8010-12000 |
||
|
CLT/A-3×6.5 |
9390-14100 |
||
|
CLT/A-3×7.0 |
10890-16320 |
||
|
CLT/A-3×7.5 |
12510-18750 |
||
|
CLT/A-3×8.0 |
14250-21290 |
||
|
CLT/A-4×3.5 |
2640-5440 |
||
|
CLT/A-4×4.0 |
4720-7120 |
||
|
CLT/A-4×4.5 |
6000-9000 |
||
|
CLT/A-4×5.0 |
7440-11120 |
||
|
CLT/A-4×5.5 |
8960-13440 |
||
|
CLT/A-4×6.0 |
10680-16000 |
||
|
CLT/A-4×6.5 |
12520-18800 |
||
|
CLT/A-4×7.0 |
14520-21760 |
||
|
CLT/A-4×7.5 |
16680-25000 |
||
|
CLT/A-4×8.0 |
19000-28500 |
||
|
CLT/A-6×4.0 |
7080-10680 |
||
|
CLT/A-6×4.5 |
9000-13500 |
||
|
CLT/A-6×5.0 |
11160-16680 |
||
|
CLT/A-6×5.5 |
13440-20160 |
||
|
CLT/A-6×6.0 |
16020-24000 |
||
|
CLT/A-6×6.5 |
18780-28200 |
||
|
CLT/A-6×7.0 |
21780-32640 |
||
|
CLT/A-6×7.5 |
25020-37500 |
||
|
CLT/A-6×8.0 |
2850-42780 |
Keyword:
CLT/A series cyclone dust collector (single cylinder, double cylinder, three cylinder, four cylinder, six cylinder)
technical advantage
EPC "Turnkey Project" Process Diagram
We optimize the costs of design, procurement, and construction through refined control throughout the entire process, significantly reducing the one-time investment and full lifecycle operation and maintenance expenses of the project; The core equipment and systems of the project have passed ISO system certification and EU CE certification, and the entire process meets local environmental regulations and safety standards, providing compliance guarantees for your overseas projects from design to delivery, achieving efficient implementation and stable operation.
Design
E
Feasibility study, process design, and construction drawing design of the project
Procurement
P
Manufacturing of core equipment and integrated procurement of high-quality equipment both domestically and internationally
Construction
C
Project installation and debugging, system integration, completion acceptance
RELATED CASE
RELATED PRODUCTS
Qualifications
Business license
Safety Production License
Construction Enterprise Qualification Certificate
Engineering Design Qualification Certificate
ISO 14001:2015
ISO 9001:2015
Leave a message and you will receive a surprise gift!
contact us
We are here for you!
Contact us
WhatsApp/Mobile: +86-13801339781
Factory Address: No. 283 Zhongshan Avenue, Jinshan Street Office, Huangshi Economic Development Zone, Hubei, China
Head Office Address: No. 1178, Gaoke Building, Jiayuan Road, Hongshan District, Wuhan, Hubei, China